Product Description
Tổng Clo được định nghĩa là tổng lượng Clo tự do, Cloramin, Clo hữu cơ và Clo kết hợp trong mẫu. SC9184-TC được thiết kế để theo dõi tổng lượng Clo trong nước uống, nước rửa, nước làm mát hoặc các mẫu nước ngọt khác. SC9184-TC có hai phạm vi để lựa chọn: Dải cao 0,05 đến 20 ppm Cl2 và Dải thấp 0,005 đến 2.000 ppm. Cảm biến làm giảm đáng kể sự phụ thuộc vào pH, do đó không cần bù PH cho hầu hết các ứng dụng. Nó thường kết hợp một tế bào dòng acrylic gắn bảng với thiết bị điều khiển dòng chảy. Delta-Phase GDC có thể lấy tín hiệu kỹ thuật số của cảm biến và cung cấp các chức năng hiển thị, ghi dữ liệu và điều khiển.
ĐẶC ĐIỂM VÀ LỢI ÍCH
● Hệ thống gắn bảng điều khiển dòng chảy, lắp đặt đơn giản.
● Thiết kế plug and play, thiết lập dễ dàng và sẵn sàng sử dụng.
● Tuân theo Phương pháp EPA 334.0
● Giao diện kỹ thuật số RS485 Modbus RTU
● Giảm đáng kể sự phụ thuộc vào pH.
● Hoàn toàn tương thích với 4 loại GDC với sự hỗ trợ hoàn toàn về hiển thị, dữ liệu ● ghi nhật ký và điều khiển.
THÔNG SỐ KỸ THUẬT
Measurement Principle | Membrane-covered , amperometric 3-electrode system with integrated electronic |
Range | (0.005 to 2.000/20.00)mg/l, ppm |
Accuracy | 0.001mg/l (0.005~2) mg/l, ppm 0.01mg/l (0.05~20) mg/l, ppm |
Resolution | 0.01 mg/l, ppm |
Repeatability | ±1%FS |
Temp. compensation | Automatically, by an integrated temperature sensor |
pH Range | pH 4 to 12, greatly reduced pH dependence (linear decrease at approx. 5% per unit increase in pH) |
Sample Flow Rate | Approx. 30 L/h |
Run-in Time | First start-up approx. 2 hours |
Operate Pressure | Max. 0.5 bar, no pressure impulses and/or vibrations |
Operate Temp. | 41 °F- 113 °F (5- 45°C) |
Response Time | T90 approx. 2 min |
Zero Point Adjustment | Not necessary |
Slop Calibration | At the device, by analytical determination of the chlorine concentration, DPD-4-method (DPD-1 + DPD-3) |
Interferences | ClO2: measured 100% O3: measured with a slope of approx. 130% (factor 1.3 in relation to the slope for chlorine) |
Material | Microporous hydrophilic membrane, PVC-U, stainless steel 1.4571 |
Power Supply | 24VDC, 40mA |
Digital Interface | Modbus RTU |
Maintenance | Regular control of the measuring signal: at least once a week Replacement of the membrane cap: once a year (depending on the water quality) Replacement of the electrolyte: every 3 ~ 6 months |
Spare Parts | Membrane cap: M48.1 Electrolyte: ECP1.3/GEL |
Dimensions | 1” O.D. and 8.07” Length (O.D. 25.4mm × 205 mm) |