Product Description
SC9184-OZ là cảm biến Ozone hòa tan (O3) gắn trên bảng điều khiển, sẵn sàng sử dụng. Nó cung cấp một số phạm vi đo lường để đáp ứng các ứng dụng khác nhau: 0 ~ 2,00 ppm để khử trùng và 0 ~ 10,00 ppm cho quá trình oxy hóa và tẩy trắng. Ozone là một chất khí không màu đến xanh nhạt, khi ở nồng độ thấp; nó tạo ra một mùi axit khó chịu. Ozone là chất oxi hóa mạnh, mạnh hơn clo và clo đioxit. Nó phản ứng nhanh chóng, phân hủy thành khí oxy, và làm tăng lượng oxy trong nước khi được áp dụng để xử lý nước.
Thông số kỹ thuật:
Measurement Principle | Membrane-Covered, amperometric 2-electrode system |
Range | (0.05 ~ 0.50 / 2.00 / 5.00 / 10.00) mg/l, ppm |
Resolution | 0.01 mg/l, ppm |
Operating Temp. | 41 to 122 °F (5 to 50 °C) |
Temp. compensation | Automatiacally, by integrated temperature sensor, Changes of temperature: <5 °C per hour |
Max. allowed Operating Pressure | 1.0 bar, no pressure impulses and/or vibrations |
Flow Rate | Approx. 30 L/h |
PH Range | 2- 12 pH |
Run-in Time | First start-up approx. 1 hour |
Response Time | T90: approx. 50 sec. |
Zero Point Adjustment | Not necessary |
Slop Calibration | At the device, by analytical determination |
Material | PVC-U, 316L |
Power Supply | 24VDC by GDC |
Storage | Probe:Can be stored frost-free, dry and without electrolyte for unlimited time at 5 ~ 40°C Membrane Cap: Used membrane caps cannot be stored! Electrolyte:In original bottle and protected from sun light at least 1 year at 5~25°C |
Maintenance | Regular control of the measuring signal: at least once a week Replacement of the membrane cap: once a year (depending on the water quality) Replacement of the electrolyte: every 3 ~ 6 months |
Spare Parts | Membrane Cap: M7N O3 for below 0.5ppm; M7D O3 for over 2 ppm Electrolyte: EOZ7/W |