Electromagnetic Flow Meter BQ-MAG
Giá (chưa VAT):
LƯU LƯỢNG KẾ ĐIỆN TỪ BQ-MAG
Ưu điểm của lưu lượng kế điện từ BQ-MAG
1. Phép đo không bị ảnh hưởng bởi sự thay đổi về mật độ, độ nhớt, nhiệt độ, áp suất và độ dẫn điện của lưu chất. Độ chính xác cao được đảm bảo nhờ nguyên lý đo tuyến tính.
2. Không có bộ phận chuyển động bên trong đường ống, không gây tổn thất áp suất và yêu cầu ít khắt khe hơn về chiều dài đoạn ống thẳng.
3. Dải kích thước đường ống đa dạng từ DN 6 đến DN 2000. Có nhiều loại vật liệu lót và điện cực để lựa chọn, phù hợp với các đặc tính lưu chất khác nhau.
4. Sử dụng phương pháp kích từ sóng vuông tần số thấp có thể lập trình, giúp cải thiện độ ổn định của phép đo và giảm tiêu thụ điện năng.
5. Tích hợp vi điều khiển (MCU) 16-bit, mang lại độ tích hợp và độ chính xác cao; xử lý hoàn toàn bằng kỹ thuật số, khả năng chống nhiễu tốt và đảm bảo độ tin cậy trong phép đo; dải đo lưu lượng lên tới 1500:1.
6. Màn hình LCD độ phân giải cao có đèn nền.
7. Hỗ trợ giao tiếp kỹ thuật số thông qua cổng RS485 hoặc RS232.
8. Tính năng thông minh phát hiện đường ống rỗng và đo điện trở điện cực, giúp chẩn đoán chính xác tình trạng đường ống rỗng hoặc sự nhiễm bẩn trên các điện cực.
9. Sử dụng các linh kiện SMD và công nghệ dán bề mặt (SMT) giúp nâng cao độ tin cậy của thiết bị.
TECHNICAL PARAMETERS
|
Mediuim |
Water,wastewater,slurry,sea water, mud and other conductivity liquids |
|
Diameter |
DN6~DN2000mm |
|
Accuracy |
+/-0.5% |
|
Temperature |
<80℃(rubber); <180℃(PTFE) |
|
Pressure |
4.0Mpa(DN10~80); 1.6Mpa(DN100~150); 1.0Mpa(DN200~1000); 0.6Mpa(DN1200~2000) |
|
Flow speed |
0.3~10m/s |
|
Electrode |
SS316L(standard); Titanium; Tantalum; Hastelloy, platinum |
|
Lining |
PTFE; Rubber; polyurethane PUetc |
|
Connection |
Flange; thread, tri-clamp |
|
Body material |
Carbon steel, SS304, SS316 |
|
Power supply |
220VAC, 24VDC, Battery |
|
Output |
Pulse; 4~20mA; HART; RS485; RS232, MODBUS; GPRS |
|
Protection |
IP65 or IP68 |
SELECTION OF LINING MATERIAL
|
Lining Material |
Features |
Temperature |
Typical Medium |
|
Neoprene(CR) |
Medium abrasion resistance, general acid salt solution |
<80℃ |
Tap water, industrial water, sea water |
|
Polyurethane rubber(PU) |
Excellent wear resistance and poor acid and alkali resistance |
<80℃ |
Slurry, pulp, mud, etc. |
|
PTFE(F4 or PTFE) |
Stable chemical properties, corrosion resistance to boiling hydrochloric acid, sulfuric acid, aqua regia, concentrated alkali |
<140℃ |
Corrosive acid-base salt solution |
|
Polyperfluoroethylene propylene(F46 or FEP) |
Chemical properties equivalent to F4, tensile strength, tensile strength better than F4 |
<180℃ |
Corrosive acid-base salt solution |
SELECTION OF ELECTRODE MATERIAL
|
Electrode |
Performance |
|
SS316L |
Suitable for: domestic water, industrial water, raw water well water, urban sewage, weak corrosive acid, alkali, salt solution |
|
Hastelloy B |
Suitable for: non-oxidizing acid such as hydrochloric acid with concentration less than 10%, sodium hydroxide with concentration less than 50%, alkali hydroxide solution at all concentrations; phosphoric acid and organic acid; Not for: nitric acid |
|
Hastelloy C |
Suitable for: mixed acid (such as mixed solution of chromic acid and sulfuric acid); oxidizing salts (such as seawater, containing Cu+++, Fe+++) |
|
Titanium |
Suitable for: salt (such as chloride, sodium salt, potassium salt, ammonia salt, hypochlorite, sea water), potassium hydroxide, ammonium hydroxide, cerium hydroxide solution with concentration less than 50%; Not for: reducing acids such as hydrochloric acid, sulfuric acid, phosphoric acid, hydrofluoric acid; |
|
tantalum |
Suitable for: hydrochloric acid (concentration less than 40%), dilute sulfuric acid and concentrated sulfuric acid (excluding fuming sulfuric acid); chlorine dioxide, ferric chloride, hypochlorous acid, sodium chloride, lead acetate, etc.; nitric acid (including fuming nitric acid) Aqueous acid), aqua regia with a temperature below 80° C; Not for: alkali, hydrofluoric acid |
|
Platinum |
Suitable for: Almost all acid-base solutions (including fuming sulfuric acid and fuming nitric acid) |
|
Tungsten carbide
|
Suitable for: pulp, sewage, mud, resistant to solid particles |
HOME
Bình luận